How do I factory reset my Funlux camera?

To reset the camera, use a pin or a thin object to press and hold the reset pinhole on the back of the camera for 10 seconds. The LED Status Light will off and then start blinking green when the camera is ready to be set up again.

Answer: The reset button is on 1 of the 3 cables of the camera. Please press the reset button for about 10 seconds to reset it. You also can reset it on smart phone with CamHi app.

Likewise, how do I reset my PTZ camera? Press and hold the rest button for 10 seconds to restore the camera to the factory default settings. Note: If the standard 10 second button press does not factory default the camera, press and hold reset button until the camera reboots (power light changes status), then release.

Correspondingly, how do I reset my DVR to factory settings without a remote?

Factory Reset Instructions

  1. First, make sure that the unit is turned off.
  2. Then press and hold any button on the included infrared remote control.
  3. While holding the button on the remote, power on the unit.
  4. You should hear a single beep followed by a double beep.
  5. Now that the DVR is booted, it will be set to the factory default settings.

How do I reset my WIFI camera?

Factory reset your Insteon Wi-Fi Camera

  1. Connect your camera to your router using an ethernet cable.
  2. Ensure your camera is connected to power.
  3. Use a straightened paperclip to press and hold the recessed reset button for 10 seconds.

How do I reset my phone?

Factory reset your Android phone from the Settings menu In the Settings menu, find Backup & reset, then tap Factory data reset and Reset phone. You’ll be prompted to enter your passcode and then to Erase everything. Once that is done, select the option to reboot your phone. Then, you can restore your phone’s data.

How do I troubleshoot my IP camera?

The Top Ten Tips of Troubleshooting Reboot the camera. Ping & discover the camera. Check ARP tables. Check for IP conflicts. Verify camera power & connection. Check the cabling. Know the password. Upgrade Firmware.

How do I reset my IP address for my IP Camera?

How do I change the LAN IP address of my camera? Step 1: Open a web browser and enter the IP address of the camera in the address bar (default is 192.168. Step 2: The default username is admin and the password field should be left blank. Step 3: Click on Setup on the top menu bar. Step 4: Go to Network Setup and select Static IP Address.

How do I view my IP camera on the Internet?

How to view your IP camera remotely via a web browser Find your camera’s IP address. Open a web browser and type the IP address. Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera. After you change the port, you will need to reboot the camera in order to save the changes.

How do I setup my Keye camera?

1, connect to power, make sure you hear the “ding” sound from the camera; 2, open “keye” app, choose “add camera”; 3, choose “wireless installation”; 4, make sure your phone is connected with non-5G WiFi, (if your phone is connected with 5G WiFi, go to phone setting to change it to 2.4G or non-5G WiFi).

How do I connect my IP camera to my phone?

How to connect IR Camera to an Android device: Push in on the center of the navigation pad to display the menu system. Select Setting and push in on the center of the navigation pad. Use the navigation pad to select Connections > Wi-Fi. Select Connect to network and push in on the center of the navigation pad.

How do I refresh my Icsee camera?

Power on the camera, the red indicator light will lit up. 2. Using a pin to hold on press the reset button for 10 seconds until you hear the voice: Restore factory settings, pls don’t power up.

Why does my IP camera keep going offline?

Occasionally, your camera may go offline due to network connectivity. Check for interference from other WiFi networks. Interference may be problematic when living in an apartment complex, where there are multiple networks operating on the same channel. Change the channel on your router.

Can wireless cameras work without Internet?

Even your IP CCTV cameras are without Internet access, you can still get video surveillance in off-grid places like your remote farm, cabin, rural home, and other areas without Internet or WiFi connection. You can get local recording even your security cameras have no Internet access.

What is CamHi?

CamHi is a useful app which enables you to view the live footage from your network cameras on your Smartphone on the go. You will have to tap on the Add Camera option in the Camera window in order to add a camera into this network camera viewer.

Why does my camera not work?

Restart the phone. If restarting doesn’t work, clear the cache and data of the camera app by Settings > Applications > Application manager > Camera app. Then tap Force Stop, and go to the Storage menu, where you select Clear Data and Clear Cache. Once you’re done, restart your phone.