How do you reset the tire pressure light on a Hyundai Santa Fe?

Without starting the car, turn the key to the “On” position. Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes to reset the sensor. You’ll usually find the tire pressure monitor reset button beneath the steering wheel.

Drive the car at 50 mph for about 10 minutes. Without starting the car, turn the key to the “On” position. Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes to reset the sensor.

Also Know, why is my tire pressure light still on after filling tires? If you’ve added air but the air pressure warning light stays on, there’s a problem with your Tire Pressure Monitoring System or you have a slow leak. Quick Tip: If the TPMS warning light comes back on after you’ve filled the tire with air, recheck the tire to make sure it is inflated to the proper air pressure.

Similarly, how do you reset the tire pressure light on a Hyundai?

How to Reset a Hyundai Tire Pressure Monitor

  1. Park the Hyundai on a level surface.
  2. Remove the valve cap of the tire that was indicated as being low on air.
  3. Press the end of the pressure gauge into the nozzle to measure the current air pressure.
  4. Press the end of the compressed air hose into the valve for a few seconds to add air to the tire.

Where is the TPMS reset button?

Most of the cars with direct TPMS have a reset button located under the steering wheel through which you can conveniently re-calibrate the sensors. Put the key in the ignition and turn on the battery but don’t start the car. Push the reset button for about 3 seconds or until the system’s light start blinking.

How do I reset my tire pressure light?

To reset the system, first make sure the tire pressures are correct. Turn the engine on, then press and hold the reset button. You’ll find it low and to the right of the steering wheel on the instrument panel. Hold the button down until the TPMS indicator light in the instrument panel blinks slowly 3 three times.

What does TPMS mean on my Hyundai?

TPMS or Tire Pressure Monitoring System is fitted to Hyundai cars to provide a warning of low pressure on any one of four tires on the vehicle.

What is the tire pressure for Hyundai Santa Fe?

33 PSI

How do you check tire pressure?

How to check tire pressure Purchase a trusted tire pressure gauge. Check your tires “cold” – before you’ve driven or at least three hours after you’ve driven. Insert tire pressure gauge into the valve stem on your tire. Compare the measured psi to the psi found on the sticker inside the driver’s door of your vehicle or in owner’s manual.

What should my tire pressure be?

The Optimum. You’ll find the manufacturer’s optimum or recommended tire pressure for your car on a sticker in the door jamb, or in your owner’s manual. Some models even place the stickers on the trunk lid, in the console or on the fuel door. Recommended pressure is usually between 30 and 35 PSI.

How do tire pressure sensors work?

How does the Tire Pressure Monitoring System work? Direct TPMS uses a sensor mounted in the wheel to measure air pressure in each tire. When air pressure drops 25% below the manufacturer’s recommended level, the sensor transmits that information to your car’s computer system and triggers your dashboard indicator light.

How do you reset the tire pressure light on a 2017 Hyundai Elantra?

If tire pressure is OK, turn the wheel a quarter turn and wait another four minutes (the sensor may be in an RF null). If the warning light is still on or if the TPMS warning indicator is lit, there is a malfunction in the TPMS. NOTE: If the tire pressure sensor is replaced, it will need to be initiated.

How long does it take for tire pressure light to go off?

Once the tires are properly inflated, the light may go off after you’ve driven a few miles. If the light doesn’t automatically turn off after about 10 miles, the TPMS may need to be reset, as directed in the vehicle’s owner’s manual.

How long can you drive with TPMS light on?

If the TPMS Light flashes for 1 to 1.5 minutes after you start your car, then remains on, this means the system is not functioning correctly. A mechanic should look at your vehicle as soon as possible. If you do need to drive, be careful as the TPMS system will no longer alert you of low tire pressure.

Can cold weather cause low tire pressure light to come on?

Your tire pressure will decrease about 1 psi for every 10 degrees Fahrenheit the outside air temperature drops. So now, the temperature drops over night overnight temperature hits the low 40s, your tire pressure will drop down by 5 psi, almost certainly turning on the tire pressure warning light .

What causes TPMS malfunction?

Most TPMS failures are caused by tire pressure sensors that have reached the end of the road. The batteries inside the tire pressure sensors have a service life that typically ranges from 5 to 7 years. Tire pressure sensors also can fail as a result of corrosion on or inside the valve stem.

Can you take a driving test with the tire pressure light on?

Check your tire pressure. If it is about the same as the other tires, then the battery in your TPMS is most probably dead. Just inform your drive test examiner of that fact. If they see that your tire is not low on air, there is a very high chance they will believe that is the case and give you a pass on the light.

Can AutoZone Check TPMS?

TPMS Light and Check-Engine-Light Evaluation If your tire pressure monitoring system (TPMS) light turns on, they’ll evaluate that too: “Pep Boys offers free engine light code retrieval designed to provide the answers you need when your Check Engine light comes on.” AutoZone and O’Reilly also offer this service.

How long does TPMS take to reset?

Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes to reset the sensor.