How much does gravel cost per ton?

Bulk crushed stone and gravel prices are $10 to $50 per ton on average. Road base costs $18 to $30 per ton, and plain pea gravel or limestone costs $28 to $45 per ton. Buying gravel in small quantities costs over $100 per ton. It takes 1.4 tons of stone per cubic yard.

#57 Granite Gravel—$52 per ton Typical construction, driveway, and drainage gravel.

Likewise, what is the best gravel for a driveway? Top layer choices for gravel driveways might include crushed shale, limestone, granite and concrete, along with other types of gravel in various colors to meet your aesthetic needs.

Additionally, how much is a load of gravel for a driveway?

Gravel prices for a driveway range from $10 to $50 per ton or $15 to $75 per yard depending on the rock type, volume ordered, and delivery fees. When including delivery, spreading, and compacting, driveway stone and rock costs $100 to $120 per ton installed.

How much is a ton of rock?

Landscaping Rock & Stone Pricing

Rock Type Price
Large Boulders $100-$600 per ton
Bull $37 per cubic yard $4 per bag $2.50 per 5-gallon bucket
River Rock Gravel $40 – $45 per ton $30 – $35 per cubic yard $4 – $8 per bag
Crushed Stone, Rock, Shells $50 – $65 per ton $40 – $55 per cubic yard

How much does a dump truck full of gravel cost?

The cost of gravel ranges from $10 to $50 per ton, $15 to $75 per yard, $1 to $3 per square foot, or $1,350 per truck load depending on the rock type, volume, and travel distance. Delivery is included up to 10 miles.

What size is #57 gravel?

About #57 Limestone Gravel The size of #57 Stone is 1 inch and under. #57 Stone is the most common driveway gravel in Florida. #57 Stone is commonly used as a drainage gravel. #57 Stone is also used in mix concrete, mix asphalt and as bases for retaining walls and driveways.

How many square feet does 1 ton of 57 gravel cover?

#57 Gravel Coverage: Each ton covers approximately 60 square feet at 4″ deep, 80 square feet at 3″ deep, or 120 square feet at 2″ deep.

How many tons is a dump truck?

Transfer dump trucks typically haul between 26 and 27 short tons (23.6 and 24.5 t; 23.2 and 24.1 long tons) of aggregate per load, each truck is capable of 3–5 loads per day, generally speaking.

What size is #67 stone?

#67. Crushed stone #67 includes stone that is ¾” or smaller in size. This is a great material for road and slab base as well as fill.

What is the cheapest material for a driveway?

Pound for pound, aggregate is the cheapest of these four common driveway materials. A basic gravel driveway can cost as little as $0.50 per square foot – an order of magnitude less than a professionally installed asphalt, stone, or concrete driveway.

How many tons of gravel do I need?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

What is Type 2 gravel?

A graded aggregate, typically crushed stone and/or crushed concrete with sand and gravel. Used as granular sub base or back-fill. Type II compacts well. Type II quantity. Category: Sands, Soils, and Gravel.

What is driveway gravel called?

Gravel is typically graded by size, and most driveways use at least three different sizes of gravel that are put down in layers to create a solid foundation and ensure proper drainage. Also called “clean stone,” this base gravel is made from machine-crushed stone and is composed of irregular rock fragments.

What size gravel do I need for my driveway?

In general, driveway gravel should be relatively large, between about 3/8 and 3/4 inch in diameter, as compared to the gravel used for footpaths, which is typically 1/4 to 3/8 inch in diameter. Another factor to consider is the amount of very small granular material, called “fines,” in the gravel.

Can I put gravel over grass?

You can lay the barrier right on top of the grass without mowing. Keep in mind what the gravel is intended to support. If it is heavy trucks, then at least a base layer of larger stone is needed under the gravel. Place the soil barrier under the stone.

What is the best material for driveways?

The five best materials to pave your driveway with Exposed aggregate. This is a type of concrete finish obtained by removing a thin layer from the top of laid concrete to reveal the pebbles, shells, stones and/or sand near the surface. Concrete. Bluestone pavers. Clay brick pavers. Timber sleepers.

How do I calculate gravel for driveway?

Measure the length and width of your driveway in feet. Multiply the length by the width to get surface area and divide the result by three because 4 inches is 1/3 of a foot. You now have the volume of gravel needed in cubic feet. Divide the volume in cubic feet by 27 because there are 27 cubic feet in a cubic yard.