Between 0 and 1 inch, there are marks that denote 1/8, 1/4 (or 2/8), 3/8, 1/2 (or 4/8), 5/8, 6/8 (or 3/4), 7/8, and 1 (or 8/8) of an inch. In total, there are 96 of these marks on a 12 inch ruler.

The red marks on this **ruler are** at 1/16, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, **5/8**, 11/16, 3/4, 13/16, 7/8, 15/16, and 1. When marking down a distance from a **ruler**, mark the whole inch, followed by a space, then the fraction of an inch. For example, 1 1/2, or 2 3/8.

Secondly, what is 3/8 of an inch on a ruler? Fraction, Decimal, and Millimeter Equivalent Measurements

Fraction | Decimal | Millimeters |
---|---|---|

^{3}⁄_{8}” |
0.375 | 9.525 |

^{7}⁄_{16}” |
0.4375 | 11.1125 |

^{1}⁄_{2}” |
0.5 | 12.7 |

^{9}⁄_{16}” |
0.5625 | 14.2875 |

Also, what is 5/8 of an inch on a ruler?

Five-eighths **inch on a ruler** is a mark past 1/2 **inch** and before 1 **inch**. If the **ruler** divides the **inches** into eighths, **5/8 inch** is the fifth mark on the **ruler** from the left side. If the **ruler** divides the **inches** into 16ths, it is the 10th mark.

What does the black diamond on a tape measure mean?

The **black diamond** is meant to signify the center area between studs in a home or building. The **black diamonds** on the **tape measure** represent that spacing. The first **black diamond** is at 19.2” and after that **black diamonds** appear at 38.4”, 57.6”, 76.8” and 96”, or 8-feet.

### What is an 1/8 of an inch on a tape measure?

The third shortest line is the 1/8” (one eighth of an inch) and there are four of those. you will need a ruler or tape measure that can measure 1/16”. The shortest line is the 1/16” (one sixteenth of an inch) and there are eight of those.

### What is 5/8 of an inch in decimals?

Inch Fraction Conversion Chart – Fraction Decimal and Metric Equivalents Fraction (inches) Decimal (inches) Metric (millimeters) 5/64″ 0.078125″ 1.984375 mm 3/32″ 0.09375″ 2.38125 mm 7/64″ 0.109375″ 2.778125 mm 1/8″ 0.125″ 3.175 mm

### What is 7/8ths of an inch?

If you have a measurement of 7/8 inches, convert it to a decimal. Simply work out 7 ÷ 8 = 0.875.

### What is about 8 inches long?

Eight inches is approximately the width of a standard sheet of notebook or printer paper. This length is also two-thirds of the length of a foot-long ruler. In metric units, eight inches is equal to 203.20 millimeters or 20.320 centimeters.

### How many 32nds are in an inch?

mm to Inch Conversion Chart mm Inches (approximate) 16 5/8 20/32 17 11/16 21/32 18 11/16 23/32

### What is half of 5/8 on a ruler?

1 Expert Answer Multiply 5/8 by 1/2.

### What is the equivalent of 5 8?

1524 is equivalent to 58 because 15 x 8 = 24 x 5 = 120. 2032 is equivalent to 58 because 20 x 8 = 32 x 5 = 160.

### How do you read a ruler for dummies?

Between each centimeter (cm) mark, there should be 10 smaller marks called millimeters (mm). Make sure you read the ruler from left to right. If you are measuring an object, align it with the left side of the zero mark on the ruler. The left side of the line where the object ends will be its measurement in centimeters.

### What is 7/8 as a decimal?

Answer and Explanation: 7/8 as a decimal is 0.875. Another was of thinking of this is the number ‘7’ is 87.5 percent of the number ‘8.

### What is 1/8 as a decimal?

1 Answer. 18=0.125 .

### How does a scale ruler work?

An Architect’s or scale ruler is designed for use in determining the actual dimensions of a distance on a scaled drawing. For example, 1/8 on the ruler is in fact a scale that converts 1/8 inch on the drawing to 1 foot. This would represent a drawing with a scale of 1/8″ = 1 foot.