What is condensate neutralizer made of?

Condensate neutralizers look like tubes or boxes that are filled with gravel-like particles. These particles, which include basic compounds like calcium carbonate, CO2, and salt, filter and neutralize waste water as it moves through the drainage pipe.

A condensate neutralizer is a tank or a vessel, which is installed in line with a condensate drain from a condensing boiler, water heater or furnace (before it enters the sewer). It’s filled with media which raises the pH level of the condensate, making it safe to discharge into the sewage or septic system.

Also Know, when should I replace my condensate neutralizer? We recommend that the neutralizer is serviced annually. The neutralizer can be serviced at the same time that your service professional maintains the appliance, as most appliance manufacturers recommend yearly preventative maintenance service.

Similarly, it is asked, how long does a condensate neutralizer last?

Condensate neutralizers can last many years without needing to be serviced apart from replacing the media.

What is a neutralizer on a tankless water heater?

Neutralizer. The 9007607005 Neutralizer assembly neutralizes the condensate (acidic water) that forms in the secondary heat exchanger of the water heater. It connects to the condensate drain port of the water heater by using connectors included with the neutralizer kit.

Do I need a condensate neutralizer?

Condensate neutralizers: are they necessary? The answer is – yes, even if you don’t have to! Typical condensate from a condensing boiler has a pH level of 3.2 to 4.5, which is acidic enough to leave stains, kill shrubs, and eat away cast iron drainage systems.

Why do I need a condensate pump?

Prevent Water Damage with a Condensate Pump You install it with the air handler. When the condensate builds up, the condensate pump pumps it out. It uses mechanical force to remove the water, so you don’t have to worry about water overflowing the drain pan. It will keep the water moving out while you stay cool.

What is a neutralizer?

A neutralizer is a substance or material used in the neutralization of acidic water. It is a common designation for alkaline materials such as calcite (calcium carbonate) or magnesia (magnesium oxide) used in the neutralization of acid waters. Neutralizers help prevent: Acidic well water from creating blue-green stains.

Why is condensate acidic?

There is a natural tendency for condensate to be acidic (pH 6.9 – 4.4). Low pH can damage carbon steel piping systems. This low pH is caused by carbon dioxide (almost always present) reacting with the water to form carbonic acid (similar to acid rain) as the steam condenses.

Is condensate corrosive?

At this low pH, the condensate water is very corrosive to carbon steel piping. You can recognize carbon dioxide corrosion by the thinning of condensate line walls, particularly at the condensate liquid level within the pipe and at pipe threads where the condensate flows.

Is AC water acidic?

1 Answer. Pure condensed water is neutral (pH 7). However, water in contact with air is slightly acidic (approximately pH 5.6) due to dissolved carbon dioxide (CO2).

What does an acid neutralizer do?

The basics of an acid neutralizer water treatment system High levels of acid entering your plumbing can turn into a serious problem. The most common is the calcite acid neutralizer tank. A calcite system injects reactive magnesium oxide into the water supply which dissolves into the water and neutralizes the acid.

What is boiler water pH?

Boiler water pH refers to a quantitative figure that expresses the acidity or alkalinity of boiler water. Ideally it should be between 8.5 and 9.5. If the pH is lower than that, the boiler water will start eating the pipes and attacks the boiler equipments as well.

Will marble chips neutralize acid?

The marble chips neutralize the acidity in the condensate and should be checked every few years. As the chips dissolve, more can be added.

How much condensate does a high efficiency furnace produce?

Typical high-efficiency furnaces will actually produce about 0.8 gallons per hour of condensate for a 100,000 input BTU furnace running constantly.

How acidic is tankless water heater condensate?

“Water-heater condensate usually has a pH of two or three,” says Oshiro. “This acid can corrode drain pipe walls over time, leading to permanent damage.” He says one solution is installing neutralizer agent that essentially removes the liquid’s acidity, protecting the pipes from damage.

Does limestone neutralize acid?

Limestone is an alkaline agent with the ability to neutralize, or partially neutralize strong acids. The neutralization process occurs when strong acids, in intimate contact with limestone chips, react with Calcium Carbonate (CaCO3, the primary constituent of limestone) to form water, carbon dioxide, and calcium salts.

Does tankless water heater need a drain?

Smart inspectors understand that a tankless water heater needs a drain pan just as a tank style heater does, and that the code protects the homeowner from the water damage, mold issues, etc.

How acidic is furnace condensate?

Furnace condensate is acidic, but it is not highly acidic. It is about the same as orange juice. It is usually around a PH of 5. Just found info that indicates that the condensate from the combustion process is a Ph of about 3.5 – 4 which is quite acidic.