Chest is measured 1″ down from the armhole (1/2 measurement) Length (HSP) is center front length measured from highest Chest is measured 1″ down from the armhole (1/2 measurement). Length (HSP) is center front length measured from highest point on the shoulders (HSP) to the bottom hem.
HPS: (High Point Shoulder) A main reference point located at the highest point of the shoulder, where the shoulder seam meets the neckline. Many measurements are given in relation to the HPS. Side Seam (SS): Seams on the left and right sides of a garment from the bottom of the armhole down to the bottom hem.
Likewise, what is neck hem measurement? Button up the shirt and lay it flat on the ground with the back of the shirt facing up. Place the measuring tape at the seam where the collar band attaches to the yoke (the fabric that sits across the shoulders) and measure straight down the middle of the back of the shirt to the hem at its longest point.
Secondly, what does HSP stand for in clothing?
center front length
How do you take measurements for clothes?
How to Take Your Measurements
- Shoulder Width: Measure across the back from the corner of one shoulder to the corner of the other shoulder.
- Bust: Measure around the fullest part of the bust.
- Waist: Measure the smallest part of the waist.
- Center Front Length:
How is hem measured?
Measure the length you want the article of clothing to be on the person. Use a sewing tape measure and measure from the waist line down. Fit the project to the person you have sewed it for. Choose the desired length, fold the cloth under and pin it up. Remove the article of clothing and iron the hem into place.
How do you measure Raglan?
The raglan measurement starts from the point where shoulder seam and neck opening meet, then runs diagonally down to where the sleeve meets the base of the armhole. In other words, when you make a top-down raglan, it’s the line along which you’ll increase.
How do you measure shirt size?
How to Determine Your Dress Shirt Size Take Your Neck Circumference Measurement. Place a cloth tape measure around the base of your neck, where your shirt collar would normally sit. Round Your Neck Measurement Up. Take Your Full Sleeve-Length Measurement. Measure Your Waist. Determine the Body Fit.
How is center back length measured?
Center Back Length Starting from the intersection of the back, collar and center back seam, measure down along the center back seam to the bottom hem of the jacket.
How do you measure half length?
Half Length Measure your front length, ask a friend to help, hold the end other tape, measure at the top of shoulder (base of neck) extend the tape to the front and down over your chest and to your natural waist.
How is side seam length measured?
2- Full length: measure from shoulder-neck to waist (front and back). 3- Centre length: measure from centre neckline to waist (front and back). 4- Across shoulder: Measure from shoulder to shoulder (front and back). 5- Bust or chest arc: measure front from side seam to side seam.
How is sleeve opening measured?
Run your hands across the sleeve in a spreading motion to be sure there are no wrinkles underneath. The starting point of this measurement is at the bottom corner of the sleeve opening. Place one end of the measuring tape at this point. Run the measuring tape along the edge of the sleeve opening to the top corner.
What is half chest?
The “half-chest” or “across-chest” measurement The measurement is obtained by laying the t-shirt (hoodie, shirt or other top) flat on a flat surface. The garment is then measured across the front, side-seam to side-seam, from just a few centimetres below where the sleeve joins the body of the garment.
What does HPS stand for?
HPS Acronym Definition HPS High Pressure Sodium HPS Health Physics Society HPS History and Philosophy of Science HPS Hantavirus Pulmonary Syndrome
What does sweep mean in clothing measurements?
The sweep is the circumference of the bottom hem of a skirt, dress, coat, or jacket. For a jacket or coat, measure the sweep across the bottom hem from open edge to open edge. For a skirt or dress, measure the sweep by laying the garment flat with seams matched, measure end to end, then double.
How do you measure your chest size?
How to measure your chest: Wrap the tape measure under your armpits, around the fullest part of your chest. The tape measure should be snug. Not so tight that it constricts breathing, but not so loose that the tape measure slides down. Don’t puff out or flex your chest. Just stand normally.
What does nape hem mean?
The Nape to Waist Length measurement is, basically, the length of material needed to cover the front of the body from the bottom of the neck down to the waist. It is a crucial to take this measurement correctly if one has any hope of drafting a bodice that fits correctly over the bust without riding up at the waist.
What is center front length?
SHOULDER TO WAIST BACK – Measure from the top of the shoulder at the neck to the waist at the back. 18. CENTER FRONT – Measure from the center of the bottom of the neck to the waist at the front. 19. CENTER BACK – Measure from the center of the bottom of the neck to the waist at the back.