What is the density of plasterboard?

Density: 530 Kg/m3 Weight: 6.4 Kg/m2 Gypsum board is an ideal material for wall and ceiling lining.

To calculate the density of the plasterboard, establish the weight per square metre and divide it by its thickness (metres), e.g. 12.5mm Gyproc WallBoard weighs 8kg/m2, divide by 0.0125m = 640kg/m3.

Also Know, how heavy is a pallet of plasterboard? Pallet of Plasterboard 2400 x 1200 x 12.5mm (8′ x 4′ x 1/2″) 72 Sheets.

Weight 1700 kg
Edge Tapered Edge, Square Edge

Beside this, how much does a sheet of 15mm plasterboard weight?


Length 2400 mm
Thickness 15 mm
Width 1200 mm
Weight 31.10 kg
Material Gypsum Plasterboard

What is the thermal conductivity of plasterboard?

Our Gyproc ThermaLine laminates comprise of Gyproc WallBoard (thermal conductivity 0.19 W/mK) and rigid foam insulation (thermal conductivity ranges from 0.02 to 0.04 W/mK depending on type).

What is the difference between wallboard and plasterboard?

is that plasterboard is a construction material consisting of a rigid panel of several layers of fibreboard or paper bonded to a gypsum core while wallboard is a construction material of pre-made boards used for walls and ceilings, usually a gypsum core with a paper surface.

What is plasterboard made of?

Drywall (also known as plasterboard, wallboard, sheet rock, gypsum board, buster board, custard board, or gypsum panel) is a panel made of calcium sulfate dihydrate (gypsum), with or without additives, typically extruded between thick sheets of facer and backer paper, used in the construction of interior walls and

How much is a sheet of plasterboard?

The Costs Internal walls 200 sheets 12.5mm plasterboard @ £3.84 each £768.00 Ceilings and stub walls to loft 130 sheets 15mm plasterboard @ £5.20 per sheet £676.00 VAT @ 20% £135.20

What is the R value of plasterboard?

R = 0.45

What is wallboard used for?

Drywall, also called wallboard, any of various large rigid sheets of finishing material used in drywall construction to face the interior walls of dwellings and other buildings. Drywall construction is the application of walls without the use of mortar or plaster.

What is the weight of 5/8 gypsum board?

A 5/8″ sheet of drywall, which is used to achieve fire ratings, typically weighs a little over 70 pounds. Also, depending on their dimensions, special types of drywall including moisture resistant products are often even heavier. Four by twelve feet panels can weigh as much as 125 pounds!

What is the R value of 1/2 inch drywall?

As one example, drywall at 1/2″ thickness has an R-value of 0.45—a fairly low value. Other typical wall materials have similarly low values: 1/2″ exterior plywood has an R-value of 0.63, and exterior wood bevel siding has an R-value of just 0.80.

How much weight can a plaster wall hold?

Originally Answered: How much weight can a hollow wall/ plasterboard wall take? Your wall will be able to take as much weight as you can hang on it. Every 12″x12″ span of 1/2″ drywall can hold 40lb in pull out load, as if you were hanging from a ceiling. The other type of load is shear or pull down load.

How many sheets come in a pack of plasterboard?

72 sheets

Why is gypsum used to make wallboard?

Gypsum drywall is an effective building material because gypsum is very fire-resistant. The gypsum molecule contains within it two water molecules and one calcium sulfate. Gypsum creates a more rigid plaster than lime and does not require a fiber additive like animal hair as lime plaster does.

How much does a sheet of Gyprock weight?

Material Weights Material Weight (kg/m2) Code 10 mm plasterboard 8.3 AS1170.1-2002 TA2 13 mm plasterboard 12 AS1170.1-2002 TA2 12 mm softwood T&G lining 6.6 550 x 0.012 12 mm hardwood T&G lining 13.2 1100 x 0.012

What is the thermal conductivity of plywood?

Thermal Conductivity for some common Materials Thermal Conductivity – k -(W/m.K) Material Temperature (oC) Paraffin Wax 0.25 Platinum 70 Plywood 0.13